Serving Thurston, Pierce & Lewis countiesLicensed · Bonded · Insured · SOLISIL785NT(360) 350-8616

Commercial drywall for Chehalis buildings

We provide commercial drywall contracting in Chehalis, installing and finishing partitions to the current drawings and finish schedule.

Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile

Solis Interiors worker on a scissor lift inside a large open room.
Solis Interiors working at height with a scissor lift.

Move commercial walls from layout through finish

Commercial drywall has to fit the drawings, access window, other trades, and required sequence. If board installation and finishing fall out of step with the project, crews can face unfinished areas during the next handoff.

Solis installs and finishes commercial drywall around the project layout, specified assemblies, access, and schedule. Coordinating those stages keeps the board and finish work connected to the job sequence and gives the project team a clear handoff for each area.

  • Board and finishing work aligned to the project sequence.
  • A clear drywall handoff for the next trade.
Solis Interiors hanging drywall on a commercial job. See the work →

From bid packet to finished scope

  1. Send the bid packet

    Share plans, finish schedules and your bid date. Solis offers 24–48-hour takeoffs.

  2. Agree the scope and schedule

    Review the itemized scope, assembly details and trade handoffs with Solis before scheduling the work.

  3. Get the space finished

    Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.

Have plans ready? Let’s price the work.

Send a plan link or attach your PDF through the project form.

Commercial drywall contractor in Chehalis

Scope the commercial interior within the historic district

The National Register nomination describes Chehalis Downtown’s contributing buildings as dating before 1930. For a commercial interior refresh in that district, Solis can scope the actual walls, repair boundary, and requested finish after reviewing the rooms you plan to change. National Register nomination for Chehalis Downtown Historic District

Downtown historic-district context

The National Register nomination for the Chehalis Downtown Historic District describes its contributing buildings as dating before 1930. Interior walls vary building by building, so we look at the surface before pricing drywall or paint work there. National Register nomination for Chehalis Downtown Historic District

Take off the current drawing set

Our takeoff starts from partition locations, wall heights, door and service openings, ceilings and finish schedules. The proposal can split framing, board, joint finishing and paint prep so it lines up with the plan set, and addenda or tenant changes stay apart from the original bid drawings until quantities are final.

Coordinate phases and openings with other trades

Boxes, plumbing access, doors, glazing and overhead services all interrupt a finished partition, so the drywall sequence follows rough-in and inspections. We scope the drywall shown in the approved documents, and design, code review and trade coordination stay with the project team.

Renovating in downtown Chehalis

The National Register nomination for the Chehalis Downtown Historic District describes contributing buildings dating from before 1930. Before renovation that could disturb asbestos, Washington law has the owner get a good faith inspection by an accredited inspector and give the report to contractors before they bid, and in Lewis County the Southwest Clean Air Agency enforces the asbestos rules. For any one interior, its plans and existing walls decide the partition, repair and finish work.

National Register nomination for Chehalis Downtown Historic District

Bid documents for a commercial estimate

Send the current plan revision, wall and finish schedules, the trades included and any phasing. Mark rated or sound walls by drawing reference, and tell us which stages you want priced: framing, board, finishing or paint prep.

Commercial Drywall Contractor questions in Chehalis

Can commercial drywall be estimated from a concept plan?

A concept plan is enough for a budget conversation. A real takeoff needs the current drawings, wall types, dimensions and finishes, and our quote names the revision it used.

Does a commercial drywall contractor include metal framing?

We include it when it's part of the package you ask for, and the proposal shows framing, board, finishing and paint prep as included or excluded.

Request an estimate

For a Chehalis commercial bid, send the bid set and addenda, partition and finish schedules, wall heights and phasing.

(360) 350-8616

Share the project details

Share a plan link, add PDF plan sheets, or email your bid packet. Then add your contact details and project ZIP so we can follow up.

What are you planning?
Email bid packet

Photos up to 25 MB before prep; PDFs up to 20 MB. Up to 5 files, 40 MB total. Private with your request; photo location metadata is removed.

Company, schedule & project notes

We’ll use these details to respond to your project request.

Text us photos for a quick estimate!