Drywall Contractor & Flood-Cut Restoration in Centralia, WA
Solis Interiors is a drywall contractor serving Centralia, providing wall and ceiling repair, drywall installation and finishing. Solis Interiors provides dependable drywall repair, IICRC S500 flood-cut sheetrock restoration, detached shop finishing, and interior painting for residential and commercial properties in Centralia, WA, from historic downtown to the Skookumchuck River valley.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
56.0%
of Centralia homes were built before 1980
Asbestos was banned from wall patching compounds in 1977, so walls in these homes are checked before a flood cut opens them.
Flood-cut repair, drywall and painting in Centralia
Repair 8
- Drywall repair in Centralia, from seams to soft spots
- Holes and cutouts patched in Centralia
- Fixing cracked and stained ceilings in Centralia
- Plaster repair for Centralia's pre-war houses
- Water Damage Drywall Repair in Centralia, WA
- Flood-cut walls rebuilt in Centralia
- Rebuilding fire-damaged walls in Centralia
- Repaired and repainted walls for Centralia homes
Finishes and texture 6
Installation 8
- New drywall hung and finished in Centralia
- Basement drywall for Centralia homes
- ADU Drywall in Centralia, WA
- Drywall for Centralia apartment buildings
- Manufactured-home drywall remodels in Centralia
- Fire-rated walls and ceilings in Centralia
- Acoustic drywall for quieter rooms in Centralia
- Metal stud walls and drywall for Centralia buildings
Ceilings and commercial 3
Before flood-damaged walls come out in Centralia
- 2007The record Chehalis River flood
Lewis County says the December 2007 flood ran roughly a foot above the base flood, the 1 percent yearly flood its flood zones are drawn from. Lewis County, our flood hazard
- 50%The flood insurance program's substantial damage line
Under the flood insurance program, a home is substantially damaged when repairs cost 50 percent or more of its market value. Check floodplain rules before rebuilding. FEMA, the 50 percent rule (44 CFR 59.1)
- Before bidsWashington's asbestos inspection rule
Before work that could release asbestos, the owner or owner's agent has a good faith inspection done by an accredited inspector and gives the report to contractors before they bid. RCW 49.26.013 and WAC 296-62-07721
- PermitConstruction in Centralia
Centralia's building division says almost all construction projects in the city need a building permit. City of Centralia, building division
Questions and answers
How do we execute clean flood-cut drywall replacement and mold prevention in Centralia?
Properties in Centralia's Chehalis and Skookumchuck river flood zones require rapid, surgical intervention. We make clean horizontal flood cuts 12 to 24 inches above the water mark, extract soaked insulation, apply EPA-registered antimicrobial washes to timber framing, probe studs to verify <15% Wood Moisture Content (WMC), install 2x4 seam blocking between studs, hang mold-resistant ASTM C1396 gypsum panels, and seal mineral stains with 100% pure shellac primer.
How do we finish detached steel workshops, pole buildings, and garages in Centralia?
We install horizontal framing girts, 5/8-inch Type X fire-rated drywall, and sag-resistant ceiling panels in detached workshops and commercial pole buildings, fire-taping seams to create safe, clean, durable workspaces.
How do we tie modern drywall into historic downtown Centralia brick and timber buildings?
Renovating historic Centralia commercial spaces requires marrying new drywall to uneven masonry and heavy timber. We install custom furring strips, shim framing transitions, incorporate expansion joints, and apply smooth skim coats to establish flat wall lines.
How do we handle residential drywall patching and whole-room painting in Centralia?
Solis handles the entire project from demolition and timber blocking to pneumatic texture matching and two finish coats of premium architectural paint under a single contract.