Interior Painting in Thurston County & the South Sound
Solis Interiors provides interior painting in Thurston County and the South Sound. Interior paint looks only as flawless as the drywall underneath. Applying paint over popped screws, settled cracks, or rough patches only highlights defects. Solis Interiors coordinates wall preparation, drywall correction, primer, and premium finish coats under one accountable scope in Lacey and Olympia.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Prepare wall repairs before painting the room
Bare compound, failed patches, cracks, texture differences, and changes in sheen can show through a new coat. Painting before the wall is ready can leave surface variations visible after the room is finished.
Solis prepares interior surfaces, coordinates drywall correction and texture blending, then applies primer and finish paint. Carrying preparation into painting gives repaired walls a consistent base for the selected coating.
- Wall repairs and texture prepared before painting.
- Primer and finish coats carried through the selected areas.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
Sheen is a lighting decision before it is a durability decision
Flat paint hides surface variation and washes out under raking light; higher sheens clean up better and reflect a window or a wall-washer straight back at the eye, so every ridge left in the compound reads as a band. Chehalis is the profile that decides this locally — a median build year of 1965, 29% of units predating 1940, and only 11.7% added since 2000 — which means decades of patching under one wall and a substrate that can absorb at several different rates within a few feet. Sheen choice there follows what the surface can actually carry.
Apartment stock turns painting into a repeatable specification
Chehalis carries the heaviest concentration of large apartment buildings among the cities we serve: 566 of its 3,030 housing units, 18.7%, sit in buildings of twenty or more units, against 6.9% to 10.3% in the neighbouring cities, and the city records no mobile homes at all. Painting that stock is a different discipline from painting a house. The floor plans repeat up the stack, so one specification and one sheen have to hold across every unit, and the work is scheduled around tenant turnover, shared ventilation, and occupied neighbours rather than an empty building.
The primer coat decides how an indoor paint job looks next year
When we paint indoors, the step nobody photographs is the one that decides the result. Bare gypsum paper and dried joint compound absorb paint at different rates, so a first coat applied straight onto both dries patchy and shows every repair underneath. We seal the surface first, usually with a PVA primer, which equalizes that absorption and gives the finish coats one uniform base.
Common questions
Why is substrate preparation the foundation of lasting paint?
Before opening paint, Solis Interiors pole-sands walls, fills fastener depressions, repairs settling cracks with fiber mesh, feathers patches, and caulks trim with elastomeric sealant. Proper surface preparation ensures paint adheres uniformly without flashing or peeling.
Which low-VOC coatings perform best in Pacific Northwest homes?
During rainy months when windows stay closed, indoor air quality is paramount. We apply premium zero-VOC and ultra-low-VOC acrylic latex coatings (Sherwin-Williams, Benjamin Moore) formulated with mildew inhibitors for bathrooms, kitchens, and high-humidity areas.
How do we protect your home and furnishings during painting?
We mask floors with breathable ram board, wrap furniture in clean poly film, and shield trim with sharp-line masking tape. We apply finishes with fine-finish sprayers and microfiber rollers, finishing every project with a full cleanup and detailed walkthrough.
Related services
Cities we serve
Serving Lacey, Olympia, Tumwater, Yelm, and Tenino in Thurston County.
Also serving DuPont, Tacoma, Lakewood, Puyallup, Gig Harbor, Chehalis, and Centralia in Pierce County and Lewis County.
Choose your city
- Interior painting for Lacey homes
- Painting Olympia interiors, prep included
- Interior painting for Tumwater homes and rentals
- Interior painting for Yelm acreage homes
- Interior painting for Tenino homes
- Interior painting for DuPont homes old and new
- Interior painting for Tacoma homes, old and new
- Interior painting for Lakewood homes and rentals
- Walls and ceilings painted in Puyallup
- Interior painting for Gig Harbor homes and rentals
- Interior painting in Chehalis, prep included
- Interior painting in Centralia, room by room
Get a project estimate
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!Source: U.S. Census Bureau, ACS 2020–2024 5-year, year structure built (via Census Reporter)
Tell us which rooms you want painted
Send a photo of each room and your colors if you've picked them, and we'll price the prep and paint.