Plaster walls repaired in Gig Harbor
We repair plaster in Gig Harbor by finding the loose or damaged area and planning how the repair meets the rest of the wall. The sound edges, any drywall next to it and the finish on top decide whether the job stays small.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Repair the plaster surface and its supporting layers
A crack or loose patch can extend past the visible face into the plaster layers beneath it. Filling only the mark can leave a weak edge and a noticeable transition where the repair meets the surrounding surface.
Solis repairs damaged plaster with its supporting layers and the surrounding finish in view. Carrying the edge repair into the nearby surface makes the transition part of the work, so the wall can move from damaged plaster back to a finished room.
- Damaged plaster and its supporting layers repaired together.
- The repair edge carried into the surrounding finish.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
Plaster repair in Gig Harbor's older homes
When Gig Harbor's homes were built shapes what is behind the wall and which rules apply to the work.
- 2% Before 1940
- 2% 1940–1959
- 19% 1960–1979
- 30% 1980–1999
- 46% 2000 or later
- 2.4%of Gig Harbor homes were built before 1940
Plaster was the wall surface for nearly all buildings until the 1930s or 40s. Few Gig Harbor homes are that old, so a photo of the wall edge helps confirm whether it is plaster or drywall. National Park Service, Preservation Brief 21: Repairing Historic Flat Plaster
- 1998Median year Gig Harbor homes were built
Half of Gig Harbor's homes were built before 1998 and half after. Tell us the year your home was built when you send photos. U.S. Census Bureau, ACS 2020–2024, median year structure built
- 1978Washington's lead-safe renovation cutoff
Washington's lead renovation rules cover housing built before 1978, and a firm must be certified to do paid renovation work under them. WAC 365-230-020 and 365-230-360
- Before bidsWashington's asbestos inspection rule
Before work that could release asbestos, the owner or owner's agent has a good faith inspection done by an accredited inspector and gives the report to contractors before they bid. RCW 49.26.013 and WAC 296-62-07721
- Gig Harbor housing built before 1940
The Census Bureau's 2020-2024 ACS estimates that about 2 percent of Gig Harbor's housing units were built in 1939 or earlier. U.S. Census Bureau, ACS 2020-2024 5-year estimates, year structure built (B25034)
Find the repair boundary in sound material
A crack or a missing patch is the part of the problem you can see. We check the plaster around it for loose or detached areas so the repair doesn't end on an edge that can't hold it. A narrow crack, a failed old patch, a corner and a large section each start differently.
Make plaster and drywall meet cleanly
About 2 percent of Gig Harbor's housing was built before 1940, and plaster was the standard wall until the 1930s or 40s, so most walls here are drywall and plaster is the exception. When a repair crosses from plaster into a drywall patch, the two differ in thickness and edge, and the paint on them may differ too. We feather the joint wide or stop it at trim, especially where it runs into a door or a corner, and the quote says where the plaster work ends.
National Park Service, Preservation Brief 21: Repairing Historic Flat Plaster
Keep the old texture or plan a broader finish
A small repair can be shaped to keep the texture around it. If you're going smooth, the prep runs past the damage so the new finish doesn't leave a patch in the middle of the room. Primer and paint need an edge too, whether that's the repaired spot, the nearest corner or the whole wall, and we follow the paint maker's prep instructions for the coating and the surface.
Sherwin-Williams interior paint surface preparation guidance
Gig Harbor plaster repair, quoted from photos
Send a close view of the crack or loose edge and a photo of the room that shows the surfaces next to it. We'll quote the plaster repair, texture blending, prep and paint as separate lines.
Plaster Repair questions in Gig Harbor
Can plaster be repaired without smoothing the whole room?
Yes. We repair the damaged area and blend it into the existing finish. Smoothing the whole room is a separate job.
Does plaster repair include painting?
When you want it. We name the repair area and whether paint stops at the patch, a corner or the full wall.
Request an estimate
For Gig Harbor plaster: close and room-wide photos, the crack or loose area, earlier repairs, and your texture or paint preference.
(360) 350-8616Share the project details
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!