ADU Drywall in Tumwater, WA
Solis Interiors provides ADU drywall installation and finishing in Tumwater, taking the board, taping and surface finish through one coordinated scope. ADU work in Tumwater, Washington often reuses a garage or adds rooms beside an occupied home. Utility runs, compact corners, bathroom board choices, and the handoff to inspection all belong in one written drywall scope.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Carry an ADU from board installation through finish
An accessory dwelling has rooms, openings, and finish choices that need to come together before the walls close in. If the plan stops at board, taping and finishing can fall outside the schedule the project is working toward.
Solis installs ADU drywall from the room layout and drawings, then carries the work through taping and the selected finish. Those stages connect the wall surfaces to the dwelling's planned layout and target schedule.
- ADU board installation tied to the room layout.
- Taping and finishing carried into the project sequence.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
What to plan for in Tumwater
These local conditions help us ask better questions before we price the drywall scope.
- 2% Before 1940
- 9% 1940–1959
- 22% 1960–1979
- 24% 1980–1999
- 43% 2000 or later
- Tumwater garage conversions
Existing framing and utility chases can create more transitions than a new open shell.
- Occupied-home sequencing
Dust control, staging, and trade handoffs affect both the estimate and the workable order.
- Tumwater ADU plan setPermit review before close-in
Tumwater lists ADUs, construction, alteration, and inspections through its permit service. The approved plan identifies the board, ceiling, and separation details to be built. City of Tumwater: permit services
- Tumwater conversion framingExisting framing and chases
Utility runs and framing left from a garage can create more corners, backing, and ceiling transitions than a new open shell.
Build a Tumwater ADU scope around the actual room sequence
Provide plans, wall types, ceiling heights, access route, occupancy schedule, and the separation details from the design team. We install the listed drywall scope and flag conditions that need another trade or reviewer.
What Tumwater actually allows on the lot
Washington requires cities to allow at least two accessory dwelling units on a lot in an urban growth area zone that permits single-family homes, and Tumwater's code carries that floor. Tumwater Municipal Code 18.42.010 applies its 1,000 square foot cap to finished living space rather than gross area, so a garage or utility bay does not count against it, and the garage itself is limited to 300 square feet. Parking is required only where there is no on-street parking within 300 feet and no transit stop within half a mile. State law also requires an existing detached garage to be convertible even when it sits inside current setbacks, so the structure already on the lot is usually where the work starts. Approved plans and the local authority determine the requirement; Solis scopes the listed drywall work and coordinates the relevant handoff.
What changes the estimate?
Access, occupied-room protection, substrate condition, ceiling height, and the requested finish all change the work sequence in Tumwater, Washington. Send photos, dimensions, and the drawings or finish notes already available so Solis can separate visible drywall work from questions for the designer, inspector, or another specialist. For an ADU, the approved wall and ceiling details control fire, sound, and air-sealing questions; Solis prices the listed drywall work without promising a permit or inspection result.
Common questions
What should I send for a Tumwater adu drywall estimate?
Send wide and close photos, room dimensions, ceiling height, access notes, and the finish or project documents you have. Those details help us identify the practical next step before a site review.
What is outside a Tumwater drywall estimate?
Design approvals, permit decisions, hazardous-material testing or abatement, structural engineering, restoration drying, and other specialist work remain separate when the project requires them. We identify that boundary before pricing the drywall scope.
Share the project details
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!