ADU Drywall Installation & Finishing in Thurston County & the South Sound
Solis Interiors provides ADU drywall installation and finishing in Thurston County and the South Sound, taking the board, taping and surface finish through one coordinated scope. Drywall scope for accessory dwelling interiors, from board planning and backing review through taping, texture decisions, and a paint-ready finish. The right sequence depends on the room layout, existing conditions, and the separation details in the project drawings.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Carry an ADU from board installation through finish
An accessory dwelling has rooms, openings, and finish choices that need to come together before the walls close in. If the plan stops at board, taping and finishing can fall outside the schedule the project is working toward.
Solis installs ADU drywall from the room layout and drawings, then carries the work through taping and the selected finish. Those stages connect the wall surfaces to the dwelling's planned layout and target schedule.
- ADU board installation tied to the room layout.
- Taping and finishing carried into the project sequence.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
Plan the ADU surface as one connected scope
An accessory dwelling project can include compact rooms, utility areas, sloped ceilings, and transitions around doors or shared walls. A useful drywall brief identifies board locations, backing, access, finish level, and the handoff to primer before work begins, so the finished surfaces are evaluated together rather than as isolated patches.
Coordinate board, seams, and shared-wall details
ADU layouts often place living spaces beside garages, primary homes, or other occupied rooms. The project drawings and local review requirements should determine the assembly and any acoustic or fire-separation details. Drywall installation can then follow that approved scope while keeping penetrations, corners, and finish transitions visible for review.
Finish smaller rooms without losing the larger line
Compact interiors make uneven seams, corner movement, and mismatched texture easy to notice. Taping, skim work, texture matching, and primer preparation should be planned across each connected wall plane. That approach leaves the ADU ready for the selected paint finish without treating a small footprint as a reason to skip surface preparation.
An ADU built as new construction carries its own inspection sequence
An accessory unit built from the ground up has its own framing inspection, its own envelope, and its own separation requirements from the main house, which is a longer sequence than a garage conversion where the shell already exists. On new construction we plan the board and the finish around the inspection milestones on the approved plans, so nothing is closed up before it has been seen.
ADU drywall questions about sequencing and shared walls
What should an ADU drywall estimate include?
Share the floor plan, ceiling conditions, room photos, desired finish, and any separation details supplied by the designer or permitting team. Those details help separate board installation, repairs, finishing, and paint preparation so the requested work is clear before a site review.
Can an ADU combine repairs with new drywall?
Often, yes. Existing areas may need patching or texture blending while new rooms need board, seams, and corner treatment. Reviewing both scopes together helps keep transitions consistent and avoids promising that one finish method will fit every surface in the accessory dwelling.
How should shared-wall questions be handled?
Use the project drawings and the applicable review path as the starting point for any fire or sound separation question. A drywall estimate can identify the surfaces and sequence, while the approved design and inspection requirements determine which assembly belongs in the final scope.
Related drywall services for ADUs and multifamily projects
Cities we serve
Serving Lacey, Olympia, Tumwater, Yelm, and Tenino in Thurston County.
Also serving DuPont, Centralia, Chehalis, Tacoma, Lakewood, Puyallup, and Gig Harbor in Pierce County and Lewis County.
Choose your city
- ADU Drywall in Lacey, WA
- ADU Drywall in Tumwater, WA
- ADU Drywall in Yelm, WA
- ADU Drywall in DuPont, WA
- ADU Drywall in Centralia, WA
- ADU Drywall in Chehalis, WA
- Drywall for Olympia ADUs, pre-approved plans or custom
- ADU drywall in Tenino, room by room
- Drywall for Tacoma ADUs and conversions
- Drywall for Lakewood ADUs
- ADU drywall built to your Puyallup plans
- ADU drywall for Gig Harbor accessory units
Request an ADU drywall estimate
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!Send your ADU plans
Plans or room sizes and your target schedule let us scope the board, taping and finish.