Serving Thurston, Pierce & Lewis countiesLicensed · Bonded · Insured · SOLISIL785NT(360) 350-8616

Drywall Installation in Thurston, Pierce & Lewis Counties

Solis Interiors provides drywall installation in Thurston, Pierce and Lewis counties. By the time the first coat of compound goes on, the wall is already either flat or it is not. Solis Interiors hangs gypsum board across Lacey, Olympia, and Tacoma, and removes the old board first where that is what the room needs.

Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile

Install drywall with the finished room in mind

New and renovated rooms can have different board, backing, opening, and finish requirements. When installation ends at bare sheets, seams, texture, smooth finishing, and primer preparation may be left for a separate handoff.

Solis installs drywall from the drawings and wall conditions, then carries board through taping and the selected finish. Connecting installation with finishing leaves the walls ready for their next preparation and coating work.

  • Board installation follows drawings and wall conditions.
  • Taping and selected finish carried with the installation.
Solis Interiors hanging drywall on a commercial job. See the work →
“It's refreshing to work with contractors who do exactly what they say they're going to do and take pride in their craftsmanship.”
Jay D., Solis drywall installation customer · · Angi review

Here’s how we get it handled

  1. Text us photos or call

    A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.

  2. Agree the scope and schedule

    We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.

  3. Get the space finished

    Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.

Have a project in mind? Send us a photo.

Tell us what needs fixing or finishing. We’ll take it from there.

Removing the old board is part of the installation

A re-board usually means taking out what is there. We cut it back cleanly, check what the demolition exposes, and deal with the framing or insulation that turns up before new board goes on. The old material leaves in the same visit it comes down, and the room is left ready to hang rather than ready for another trade.

The board is chosen for the room

Moisture-resistant board belongs in a bathroom or a below-grade wall. Type X belongs where a rated assembly is specified. Ceiling board is heavier and spans differently from wall board. The drawings and the room decide which is which, and we confirm it before the order goes in rather than substituting whatever is on the truck.

Common questions

What the installation has to get right before anyone tapes

Framing gets checked for plane, board thickness and screw pattern are matched to the span and the finish, and backing goes in wherever something will hang later, because a towel bar or a television bracket is far cheaper to support now than to patch afterward. Where a long wall meets a different material, we plan the control joint instead of discovering it as a crack next winter.

Do you install over the existing wall or remove it?

Both, depending on what is behind it. A second layer can be the right answer when the existing board is sound and the added thickness does not break a door reveal or a trim detail. Removal is the right answer when the board is damaged, wet, or hiding something. We look at the wall and the trim before recommending either.

How long does a room take to hang?

A single bedroom is usually a day to hang and several more to finish, because the drying between coats sets the pace rather than the boarding. Whole floors and commercial interiors run on a sequence instead, and we will tell you the order we intend to work in before we start.

Cities we serve

Serving Lacey, Olympia, Tumwater, Yelm, and Tenino in Thurston County.

Also serving DuPont, Tacoma, Lakewood, Puyallup, Gig Harbor, Chehalis, and Centralia in Pierce County and Lewis County.

Choose your city

Get a project estimate

Choose the work you need and tell us how to reach you.

What are you planning?

Drywall Installation

Photos up to 25 MB before prep. Up to 5 files, 40 MB total. Private with your request; photo location metadata is removed.

Add project details or a contact preference

We’ll use these details to respond to your project request.

Text us photos for a quick estimate!

Send room sizes or plans for your install

We price hanging and finishing new drywall from your plans, measurements or photos of the framing.

(360) 350-8616Send project detailsText photos for an estimate