Putting Olympia rooms back after a fire
We schedule fire-damage drywall repair in Olympia as soon as restoration releases the area, replacing the burned board, rebuilding the joints and restoring the wall or ceiling finish. Where the original wall was a rated assembly, we rebuild that assembly.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Put fire-damaged walls back after restoration work
Fire restoration can leave damaged board and finish to replace after the affected area is ready for drywall work. Without a clear handoff, board replacement and texture or paint preparation can be mixed into the restoration stage.
After the restoration provider clears the remaining work area, Solis repairs the drywall and carries the wall through texture and paint preparation as needed. Keeping that work with the post-restoration phase gives the room a clear path back to finished walls.
- Remaining drywall repaired after restoration.
- Texture and paint preparation carried into the finish.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
Fire-Damage drywall repair in Olympia
When Olympia's homes were built shapes what is behind the wall and which rules apply to the work.
- 12% Before 1940
- 13% 1940–1959
- 23% 1960–1979
- 28% 1980–1999
- 25% 2000 or later
- 1982Median year Olympia homes were built
Half of Olympia's homes were built before 1982 and half after. The age of the home tells the restoration team and Solis which materials need checking before the damaged section comes out. U.S. Census Bureau, ACS 2020–2024, median year structure built
- Before bidsWashington's asbestos inspection rule
Before work that could release asbestos, the owner or owner's agent has a good faith inspection done by an accredited inspector and gives the report to contractors before they bid. RCW 49.26.013 and WAC 296-62-07721
- 48 sq ftORCAA notification threshold in Thurston County
Work involving more than 48 square feet of asbestos-containing material is an asbestos project here, and ORCAA must be notified at least 10 days before it begins. Olympic Region Clean Air Agency, asbestos guide
- PermitAlterations and repairs in Olympia
Olympia lists building alterations or repairs among work that needs a permit, while painting and similar finish work is exempt. Exempt work must still meet code. City of Olympia, what do I need
Rebuild the released area
With cleanup and any assessment done, we remove damaged board to the opening edge, check what's left and install new panels, taped and blended into the surrounding surface. Smoke cleanup and odor treatment happen before we arrive.
Follow the original wall or ceiling assembly
Rated walls and ceilings are rebuilt from the plans or restoration drawings, including panel layers, framing, insulation, joints and penetrations. A replacement board on its own doesn't restore the rating.
Gypsum Association GA-600 fire-resistance and sound-control designs
Older Olympia homes and the tear-out
Nearly half of Olympia's homes were built before 1980, when joint compound and ceiling texture could still contain asbestos. In Thurston County, disturbing more than 48 square feet of asbestos material needs 10 days' notice to the Olympic Region Clean Air Agency, so testing is part of planning the tear-out.
Restore the finish after board repair
Once the assembly is closed, we restore the texture, primer and paint. The quote says whether paint stops at the repair or a corner or covers the room. If an inspector needs to see the open wall, we wait.
Send the release and the opening map
Text the restoration release or scope, photos of the open areas and their sizes. We'll quote the rebuild and the finish to the boundary the adjuster approved.
Fire-Damage Drywall Repair questions in Olympia
Does fire-damage drywall repair include smoke cleanup?
No. Smoke, odor and debris are handled by the restoration company first.
Can standard drywall replace a damaged rated assembly?
Only if it's the board the approved assembly calls for. We rebuild to the listed design.
Request an estimate
For fire-damage repair in Olympia, text the restoration release and photos of the open areas with their sizes.
(360) 350-8616Share the project details
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!