Serving Thurston, Pierce & Lewis countiesLicensed · Bonded · Insured · SOLISIL785NT(360) 350-8616

Plaster crack and patch repair in Lakewood

We do plaster repair in Lakewood by following a crack or loose section back to firm plaster and matching the finish around it. We tell a surface crack from loose or missing plaster before we build the patch.

Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile

Repair the plaster surface and its supporting layers

A crack or loose patch can extend past the visible face into the plaster layers beneath it. Filling only the mark can leave a weak edge and a noticeable transition where the repair meets the surrounding surface.

Solis repairs damaged plaster with its supporting layers and the surrounding finish in view. Carrying the edge repair into the nearby surface makes the transition part of the work, so the wall can move from damaged plaster back to a finished room.

  • Damaged plaster and its supporting layers repaired together.
  • The repair edge carried into the surrounding finish.

Here’s how we get it handled

  1. Text us photos or call

    A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.

  2. Agree the scope and schedule

    We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.

  3. Get the space finished

    Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.

Have a project in mind? Send us a photo.

Tell us what needs fixing or finishing. We’ll take it from there.

Plaster repair in Lakewood's older homes

When Lakewood's homes were built shapes what is behind the wall and which rules apply to the work.

  1. 3% Before 1940
  2. 20% 1940–1959
  3. 37% 1960–1979
  4. 25% 1980–1999
  5. 17% 2000 or later
Share of Lakewood homes by year built. U.S. Census Bureau, 2020–2024 ACS 5-year estimates
2.8%of Lakewood homes were built before 1940

Plaster was the wall surface for nearly all buildings until the 1930s or 40s. Few Lakewood homes are that old, so a photo of the wall edge helps confirm whether it is plaster or drywall. National Park Service, Preservation Brief 21: Repairing Historic Flat Plaster

1975Median year Lakewood homes were built

Half of Lakewood's homes were built before 1975 and half after. Tell us the year your home was built when you send photos. U.S. Census Bureau, ACS 2020–2024, median year structure built

1978Washington's lead-safe renovation cutoff

Washington's lead renovation rules cover housing built before 1978, and a firm must be certified to do paid renovation work under them. WAC 365-230-020 and 365-230-360

Before bidsWashington's asbestos inspection rule

Before work that could release asbestos, the owner or owner's agent has a good faith inspection done by an accredited inspector and gives the report to contractors before they bid. RCW 49.26.013 and WAC 296-62-07721

Lakewood homes built before 1940

The Census Bureau's 2020 to 2024 American Community Survey estimates that about 3 percent of Lakewood housing units were built before 1940. U.S. Census Bureau, 2020-2024 ACS 5-year estimates, year structure built (B25034)

Trace the repair to sound material

A fine crack in stable plaster is a small job, and a section that has crumbled or come away from the lath is a bigger one. We check the edge before filling, so the patch never stops where the plaster is already weak. If the crack came back after an earlier repair, or it crosses a doorway or a change of material, tell us; it may need a look from another trade.

Where plaster meets drywall

Plaster is thicker and harder than drywall. Where the two meet, we prepare both sides so the repair doesn't leave a step. If the surrounding wall is firm the work stays local, and if the join runs through a larger damaged area it goes wider.

Sherwin-Williams surface preparation guidance for plaster and drywall

Preserve the existing texture or prepare a broader surface

A small patch keeps more of the old surface, while a wider skim changes the look of the whole wall. Paint can make a small height change show, so decide whether the room keeps its character or goes more uniform. Sherwin-Williams says plaster has to be dry and prepared before it's painted, and we wait for that.

Sherwin-Williams interior paint preparation guidance

Plaster is rare in Lakewood

Only about 3 percent of Lakewood homes were built before 1940, when plaster was the usual wall surface. So when a Lakewood wall looks like plaster, we confirm it from a photo of a broken edge or an outlet opening before we quote. Send that photo, a wide shot of the room and any history of earlier repairs.

National Park Service Preservation Brief 21

Plaster Repair questions in Lakewood

Can plaster be repaired without resurfacing the whole room?

Yes, when the plaster around the damage is firm and the finish can stop at a corner or trim.

Can a plaster repair meet new drywall?

Yes. We prepare both sides of the join so the wall reads as one surface.

Request an estimate

For Lakewood plaster, send a close photo of the damage and a wide one of the room.

(360) 350-8616

Share the project details

Choose the work you need and tell us how to reach you.

What are you planning?

Plaster Repair

Photos up to 25 MB before prep. Up to 5 files, 40 MB total. Private with your request; photo location metadata is removed.

Add project details or a contact preference

We’ll use these details to respond to your project request.

Text us photos for a quick estimate!