Fire-rated wall and ceiling assemblies in Lacey
We take on fire-rated drywall installation in Lacey, building the board layers, fasteners, joints and openings of the approved assembly so it is ready when the inspector arrives. The rating belongs to the whole assembly, and we build it exactly as listed.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Install fire-rated drywall to the specified assembly
A fire-rated wall depends on the assembly shown in the project details, along with the sequence for framing and board work. Treating the board as a stand-alone item can leave installation steps disconnected from the design.
Solis installs the specified fire-rated drywall assembly from the project details and required sequence. Carrying the assembly notes into the board work keeps installation connected to the drawings and the surrounding construction.
- Fire-rated drywall installed to the specified assembly.
- Board work follows the project sequence.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
Fire-Rated drywall installation in Lacey homes
When Lacey's homes were built shapes what is behind the wall and which rules apply to the work.
- under 1% Before 1940
- 4% 1940–1959
- 20% 1960–1979
- 32% 1980–1999
- 43% 2000 or later
- 1996Median year Lacey homes were built
Half of Lacey's homes were built before 1996 and half after. New walls in an existing home are finished to meet what is already there, so the home's age shapes the finish plan. U.S. Census Bureau, ACS 2020–2024, median year structure built
- 42.8%of Lacey homes were built in 2000 or later
Newer homes are almost all drywall over wood framing, which keeps new work and the existing walls consistent. U.S. Census Bureau, 2020–2024 ACS 5-year estimates
- ExemptPainting and finish work in Lacey
Lacey exempts painting, papering and similar finish work from building permits. Its permit page does not list drywall, so ask the city before adding or rebuilding walls. City of Lacey, construction permits
- Lacey permits for wall work
Lacey's permit page exempts painting and similar finish work but does not mention drywall or rated walls. Projects that build or rebuild walls should confirm the permit with the city first. City of Lacey construction permits
Build the drywall portion of the complete assembly
We install the board type, layers, screw spacing and joint treatment that the approved assembly calls for, and keep penetrations and edges ready for the inspector. Framing and in-wall work are coordinated before we close it. You get a wall built to its listing, so the inspection is about checking, not fixing.
Use the approved assembly detail
A sheet of Type X board isn't a fire rating. The rating comes from a tested or listed assembly: panels, layers, framing, fasteners, joints and sometimes insulation. The plans or listing number tell us which one, and we build to it.
Keep every component in view
Doors, ducts, boxes and pipes through a rated wall each need the treatment the design calls for. If a substitution comes up, the designer, manufacturer or building official has to approve it before we install it.
Shared walls and the Lacey permit
Lacey's permit page exempts painting and similar finish work but doesn't list drywall. Rated walls typically come with a permitted plan; if yours doesn't have one yet, ask the city first. In a townhome or condo, the association may also own the wall between units.
Inspection hold points
We schedule around the inspector. Where the plan requires an inspection before the face layer goes on, we stop there and wait. Other trades finish their penetrations before we close each area. When the wall passes, we tape and finish the face. If the listing calls for taped joints above a ceiling line where nobody will see them, those get taped too.
Send the listing and the plan
Text us the plan page with the assembly number, or the listing itself, plus the wall lengths and heights. We'll quote it wall by wall.
Fire-Rated Drywall Installation questions in Lacey
Does fire-rated drywall alone provide a fire rating?
No. Only the complete tested or listed assembly carries the rating.
Can an assembly component be changed during installation?
Only with approval from the designer, manufacturer or building official. We don't substitute on our own.
Request an estimate
For a rated wall in Lacey, text the plan page with the assembly number and the wall lengths and heights.
(360) 350-8616Share the project details
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!