Serving Thurston, Pierce & Lewis countiesLicensed · Bonded · Insured · SOLISIL785NT(360) 350-8616
Call (360) 350-8616

Pierce County

Drywall Contractor, Historic Plaster & Commercial Finishing in Tacoma, WA

Solis Interiors serves Tacoma, WA with specialized historic plaster restoration in the North End and Stadium District, luxury GA-214 Level 5 smooth finishes, commercial tenant buildouts, and turn-key interior painting.

Call (360) 350-8616Free estimates
Automatic drywall taper, corner roller, paper tape, and joint compound on a finishing jobsite
Bonded · $15,000Insured up to $1,000,000Verified by The One Trade Network

Services in Tacoma

How do we restore historic lath-and-plaster in Tacoma's North End, Stadium, and Proctor homes?

Tacoma's heritage homes feature authentic 100-year-old three-coat lime plaster over cedar lath. When unreinforced brick chimneys or heavy timber foundations settle, plaster keys break. Solis stabilizes historic walls by injecting structural acrylic adhesives to re-bond loose keys to lath, embedding high-tensile fiberglass mesh in low-shrinkage chemical hot mud, and floating surfaces glass-smooth while protecting original picture rails and baseboards.

When is architectural GA-214 Level 5 smooth wall finish required in Tacoma remodels?

In high-end architectural remodels and view homes along Ruston Way, open floorplans and massive southern windows subject walls to extreme grazing sunlight. Standard Level 4 taping shows visible joint flashing under satin or semi-gloss paint. Solis applies a 100% full-surface skim coat, completely equalizing substrate porosity so walls look optically flat at any time of day.

What are our commercial light-gauge steel framing and drywall capabilities in Tacoma?

We construct commercial tenant buildouts in downtown Tacoma and industrial spaces near the Port of Tacoma. We erect ASTM C645 light-gauge steel studs, hang 5/8-inch Type X fire-rated drywall, install acoustical insulation, fire-tape mechanical corridors, and finish to Level 4 commercial specs.

How do we handle ceiling water leak repairs and sag remediation in multi-story Tacoma homes?

When plumbing leaks occur in older multi-story Tacoma residences, ceiling gypsum softens and sags under insulation weight. Solis probes framing with digital moisture meters (<15% WMC), installs 2x4 sister blocking, re-secures adjacent board every 7 inches on center, applies mold-resistant drywall, and seals mineral tannins with 100% pure shellac stain blocker.

How do we provide dustless sanding in historic occupied Tacoma residences?

We safeguard your furnishings and hardwood floors using floor-to-ceiling plastic zip-walls, sealed return ducts, and commercial HEPA vacuum extractors attached directly to our sanders, capturing 99.9% of airborne particles at the tool.

Request a bidCallText