Serving Thurston, Pierce & Lewis countiesLicensed · Bonded · Insured · SOLISIL785NT(360) 350-8616

Level 5 skim-coat finish in Tenino

We finish drywall to Level 5 in Tenino, adding a skim coat over the entire panel face after the joints are done. It is the most uniform surface the GA-214 levels describe, and we show you a sample in your own light before we skim the whole room.

Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile

A step ladder and tripod work light stand near a smooth drywall surface; a blue portable dehumidifier sits on the floor.
Work lighting beside a smooth wall on a Solis jobsite.

Keep strong light from exaggerating wall transitions

Side light and a glossy sheen can reveal seams or uneven patches across a smooth wall or ceiling. A repair in one spot may not address how the broader surface looks when light travels across it.

For Level 5, Solis applies a full-surface skim with the room lighting and paint sheen in view. Treating the surface as a field carries the finish across the area instead of leaving one isolated patch to define the wall.

  • A full-surface skim across the selected area.
  • A finish chosen with room light and paint sheen in view.

Here’s how we get it handled

  1. Text us photos or call

    A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.

  2. Agree the scope and schedule

    We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.

  3. Get the space finished

    Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.

Have a project in mind? Send us a photo.

Tell us what needs fixing or finishing. We’ll take it from there.

Level 5 drywall finish in Tenino homes

When Tenino's homes were built shapes what is behind the wall and which rules apply to the work.

  1. 17% Before 1940
  2. 12% 1940–1959
  3. 22% 1960–1979
  4. 21% 1980–1999
  5. 29% 2000 or later
Share of Tenino homes by year built. U.S. Census Bureau, 2020–2024 ACS 5-year estimates
1980Median year Tenino homes were built

Half of Tenino's homes were built before 1980 and half after. The estimate is wide here, about 9 years either way. New walls in an existing home are finished to meet what is already there, so the home's age shapes the finish plan. U.S. Census Bureau, ACS 2020–2024, median year structure built

29.3%of Tenino homes were built in 2000 or later

Newer homes are almost all drywall over wood framing, which keeps new work and the existing walls consistent. U.S. Census Bureau, 2020–2024 ACS 5-year estimates

What the full-surface skim adds

Level 4 finishes the seams and screws. Level 5 puts a thin coat of compound over every square foot of board as well, so the paper face and the taped joints take paint the same way. That shows on a long wall lit from the side, under glossy paint, and on a ceiling you look across in a big room.

Gypsum Association GA-214 recommended finish levels

Existing texture is a separate job

Level 5 describes how bare board is finished. If your wall has texture now, removing it, fixing torn paper and replacing bad board come first and get their own lines in the quote. Patching compound could contain asbestos until 1977, so in an older Tenino house the existing texture is tested before we sand into it. A skim on new board in an addition starts from a different place than converting a textured room.

U.S. EPA regulatory history of asbestos bans

Judge appearance under the room's actual light

Window light raking across a wall, recessed lights and the paint sheen all change how a finished plane reads. GA-214 points to a mock-up for exactly this. On a wall that matters, we finish a sample section, you look at it at the time of day you care about, and then we skim the rest.

Gypsum Association FAQ on GA-214 and mock-ups

Pricing Level 5 wall by wall

Tell us which walls or ceilings get the skim, roughly how big they are, whether the board is new, and the paint sheen you plan to use. A photo of the light hitting the wall helps. Your quote shows Level 5 separately from any Level 4 areas and from texture removal.

Level 5 Drywall Finish questions in Tenino

Does Level 5 mean a perfectly invisible wall in every light?

No finish can promise that. Level 5 gives the most uniform surface of the GA-214 levels, and the sample shows you what to expect before we do the whole area.

Does Level 5 automatically include removing old texture?

No. Removing texture and repairing the wall underneath are priced as their own steps, ahead of the skim.

Request an estimate

Text a photo of the wall in its worst light and the paint sheen you plan to use.

(360) 350-8616

Share the project details

Choose the work you need and tell us how to reach you.

What are you planning?

Level 5 Drywall Finish

Photos up to 25 MB before prep. Up to 5 files, 40 MB total. Private with your request; photo location metadata is removed.

Add project details or a contact preference

We’ll use these details to respond to your project request.

Text us photos for a quick estimate!