Smooth walls in Tenino, from new board or old texture
We create a smooth wall finish in Tenino by fixing the damaged spots, skimming the sound surface and carrying it to a natural edge for paint. How much work that takes depends on what is on the wall now: new board, a light orange peel or a heavy pattern.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Bring textured walls through to a smooth finish
Existing texture, old repairs, and uneven areas can remain visible after a paint change. Treating one spot alone can leave a transition where the newly smoothed patch meets the surrounding wall.
Solis prepares and skims the selected wall area for a smooth finish, accounting for existing texture, lighting direction, and paint sheen. Working across the surface keeps the finishing area connected and gives the room a consistent ground for its next coat.
- A smooth finish carried across the selected wall area.
- Surface preparation connected to the next paint coat.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
Smooth wall finish in Tenino homes
When Tenino's homes were built shapes what is behind the wall and which rules apply to the work.
- 17% Before 1940
- 12% 1940–1959
- 22% 1960–1979
- 21% 1980–1999
- 29% 2000 or later
- 1980Median year Tenino homes were built
Half of Tenino's homes were built before 1980 and half after. The estimate is wide here, about 9 years either way. Send the year your home was built with your photos; it tells us what the walls and earlier patches are likely made of. U.S. Census Bureau, ACS 2020–2024, median year structure built
- 49.7%of Tenino homes were built before 1980
Asbestos was banned from wall patching compounds in 1977, so old patches and joint compound in these homes are tested before they are sanded. U.S. EPA, regulatory history of asbestos bans
- 1978Washington's lead-safe renovation cutoff
Washington's lead renovation rules cover housing built before 1978, and a firm must be certified to do paid renovation work under them. WAC 365-230-020 and 365-230-360
Start from the wall you have
New board needs finishing. A light texture can usually be skimmed over. A heavy pattern, peeling paint or torn paper may need sanding, sealing or new board before the skim. We look at the corners, the trim and any old repairs to decide whether the job is one section, one wall or the whole room.
Smooth look versus Level 5
Smooth is how the wall looks. Level 5 is a specific finish that skims the whole board after the joints are done. A smooth wall can be Level 4 under flat paint, while a textured wall needs conversion work before a Level 5 skim makes sense. We write both the look and the level into your quote.
Carry the finish to a natural stopping point
A half-converted wall shows where smooth meets texture, so we stop at a corner, run the whole plane or take in the room, whichever you choose. Paint sheen and side light change how that edge reads. About one Tenino home in five was built in the 1960s or 70s. In a house that age the old compound is tested before we sand, because patching compounds could contain asbestos until 1977.
U.S. Census Bureau, ACS 2020-2024 5-year estimates, year structure built (B25034)
Your smooth-wall quote
Text a close photo of the texture and one of the whole wall, with rough dimensions and the sheen you want. Mark any ceilings or neighboring walls to include. We quote the prep and the finish for that surface, so you know what smooth will take before we start.
Smooth Wall Finish questions in Tenino
Is a smooth-wall finish the same as Level 5?
No. Smooth is the look. Level 5 is a skim coat across the whole board after the joints, and it is one way to get there.
Can one wall be converted while the rest stays textured?
Yes. We pick a corner or another clean edge for the change and write down where the smooth surface starts and stops.
Request an estimate
Send a close photo of the current texture and a wide shot of the wall you want smooth.
(360) 350-8616Share the project details
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!