Rebuilding walls after a fire in Tacoma
Solis Interiors starts fire-damage drywall repair in Tacoma after the restoration company has cleaned up and released the rooms for rebuilding. We replace the damaged board and finish it to match, and the fire response, soot cleaning and environmental remediation stay with them.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Put fire-damaged walls back after restoration work
Fire restoration can leave damaged board and finish to replace after the affected area is ready for drywall work. Without a clear handoff, board replacement and texture or paint preparation can be mixed into the restoration stage.
After the restoration provider clears the remaining work area, Solis repairs the drywall and carries the wall through texture and paint preparation as needed. Keeping that work with the post-restoration phase gives the room a clear path back to finished walls.
- Remaining drywall repaired after restoration.
- Texture and paint preparation carried into the finish.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
Fire-Damage drywall repair in Tacoma
When Tacoma's homes were built shapes what is behind the wall and which rules apply to the work.
- 27% Before 1940
- 16% 1940–1959
- 21% 1960–1979
- 18% 1980–1999
- 18% 2000 or later
- 1967Median year Tacoma homes were built
Half of Tacoma's homes were built before 1967 and half after. The age of the home tells the restoration team and Solis which materials need checking before the damaged section comes out. U.S. Census Bureau, ACS 2020–2024, median year structure built
- Before bidsWashington's asbestos inspection rule
Before work that could release asbestos, the owner or owner's agent has a good faith inspection done by an accredited inspector and gives the report to contractors before they bid. RCW 49.26.013 and WAC 296-62-07721
- AHERASurvey rule of the Puget Sound Clean Air Agency in Pierce County
Unless the owner lives in the single-family house, an AHERA-certified building inspector surveys before renovation. Projects of 48 square feet or more can need notice and a 10-day wait. Puget Sound Clean Air Agency, contractor renovation
- PermitInterior demolition in Tacoma
Tacoma exempts painting and similar finish work, but its alteration permit covers repairs, remodels and partial or interior demolition. City of Tacoma, residential permits
Separate drywall work from fire cleanup
Before we open or replace board, the restoration team should have handled the fire and noted which surfaces can be rebuilt. Tell us about smoke or heat damage, what's already been torn out and any inspection or clearance still pending. We start when the rooms are ready.
Follow the existing wall or ceiling assembly
If the damaged wall or ceiling was part of a fire-rated assembly, we rebuild it to the approved repair detail. The rating comes from the whole assembly, so changes go through the design professional and the City.
Gypsum Association GA-600 fire-resistance and sound-control designs
Plan the surface finish after replacement
We list the board we'll replace, the surfaces we'll keep, and the finish level, texture and paint line. On a larger rebuild we fit our part into the restoration company's sequence. Tacoma's alteration permit covers repairs and interior demolition, so ask your restoration company whether your rebuild needs one.
What restoration has finished
Text us photos of the rooms, what the restoration company has completed, any approved assembly details and the areas ready for drywall.
Fire-Damage Drywall Repair questions in Tacoma
Does fire-damage drywall repair include smoke cleanup?
No. Soot and odor cleanup belong to the restoration company and come first.
Can replacement drywall restore a fire-rated wall?
Yes, when we rebuild it to the approved assembly and repair detail. A single panel doesn't carry a rating on its own.
Request an estimate
For Tacoma fire repairs, send the restoration company's scope and photos of the rooms released for rebuilding.
(360) 350-8616Share the project details
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!