Drywall repair across Tacoma, from dents to failed seams
Solis Interiors takes on drywall repair in Tacoma for cracked seams, crushed corners, loose board and damage that runs across more than one panel. We find what caused it first, so the repair holds and the finished wall looks like the rest of the room.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Get the damaged drywall back into a finished room
Holes, cracks, and damaged board interrupt the room. Filling the opening is only part of the job; the repair also has to meet the surrounding wall and its existing texture before paint goes on.
Solis repairs damaged drywall, then carries the same area through texture matching and paint preparation. That connects board repair to the surrounding finish and gives the room a clear path from damaged wall back to its painted surface.
- Damaged board repaired with the surrounding surface in view.
- Texture and paint preparation carried with the repair.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
Drywall repair in Tacoma homes
When Tacoma's homes were built shapes what is behind the wall and which rules apply to the work.
- 27% Before 1940
- 16% 1940–1959
- 21% 1960–1979
- 18% 1980–1999
- 18% 2000 or later
- 1967Median year Tacoma homes were built
Half of Tacoma's homes were built before 1967 and half after. Send the year your home was built with your photos; it tells us what the walls and earlier patches are likely made of. U.S. Census Bureau, ACS 2020–2024, median year structure built
- 64.3%of Tacoma homes were built before 1980
Asbestos was banned from wall patching compounds in 1977, so old patches and joint compound in these homes are tested before they are sanded. U.S. EPA, regulatory history of asbestos bans
- 1978Washington's lead-safe renovation cutoff
Washington's lead renovation rules cover housing built before 1978, and a firm must be certified to do paid renovation work under them. WAC 365-230-020 and 365-230-360
- Tacoma alteration permits
Tacoma's residential permit page lists partial or interior demolition under its alteration permit and exempts painting and similar finish work. City of Tacoma, residential permits
Repair follows damage across the surface
Damage rarely stops at one hole. A seam that cracked once tends to crack along its length, and a wet or crushed panel can be soft well past the mark you see. We press along the edges, check whether the board still holds a screw, and take the repair out to firm material.
Keep localized patching distinct
A single hole with clean edges is a patch, and we price it as one. This page covers the bigger jobs: several damaged spots on one wall, failed seams, or a panel that needs replacing. Grouping them lets us finish the wall once.
Resolve the cause before closing the surface
A crack that keeps coming back points at movement, and a stain points at water. We look for the cause before closing the wall, and if it needs a plumber or roofer we tell you before we start. In occupied homes we sand with HEPA dust extraction.
Gypsum Association GA-216 application and finishing of gypsum panels
Permits for bigger Tacoma repairs
Tacoma's alteration permit covers repairs, remodels and partial or interior demolition, and the City's residential permit page doesn't say where a drywall repair falls. If a repair means opening a large part of a wall, ask the City first. Text us a close photo, one of the whole wall, and what happened.
Drywall Repair questions in Tacoma
When is drywall repair broader than a patch?
When the damage crosses a seam, the board is soft or loose, or there are several spots close together. Then we repair and finish that stretch of wall as one area.
Can drywall be repaired before a leak is fixed?
No. We close the wall only after the leak is fixed and the framing and cavity are dry.
Request an estimate
For Tacoma repairs, one close photo, one of the whole wall and a line on what caused the damage are enough to start.
(360) 350-8616Share the project details
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!