Patching holes in Tacoma drywall
We do drywall patching in Tacoma for single holes, old access cutouts and other contained openings in gypsum board. We size the patch to the opening and its edges, back it where needed, and finish it into the wall or ceiling around it.
Washington licensed, bonded and insured, L&I SOLISIL785NT.Check with L&IAngi reviewsGoogle profile
Patch the opening and blend it into the surrounding wall
An opening from access work or a damaged spot can leave a hard edge in an otherwise finished room. Replacing the missing board alone may leave the patch visible where its seam or texture meets the existing wall.
Solis patches localized drywall openings, prepares the seams, and blends texture or smooth finishing into the surrounding area. For a full room finish, Solis carries the repaired surface through primer and paint.
- Localized drywall opening patched and finished.
- Texture blending and paint carried through the repair.
Here’s how we get it handled
Text us photos or call
A close-up, a wider view and your city give us a useful starting point. You can also call and talk through the work.
Agree the scope and schedule
We review the work with you, arrange a site visit where needed and put the agreed scope and finish in your estimate.
Get the space finished
Solis completes the agreed work and reviews the finish with you. Include interior painting in the scope for a complete drywall-and-paint handoff.
Have a project in mind? Send us a photo.
Tell us what needs fixing or finishing. We’ll take it from there.
Drywall patching in Tacoma homes
When Tacoma's homes were built shapes what is behind the wall and which rules apply to the work.
- 27% Before 1940
- 16% 1940–1959
- 21% 1960–1979
- 18% 1980–1999
- 18% 2000 or later
- 1967Median year Tacoma homes were built
Half of Tacoma's homes were built before 1967 and half after. Send the year your home was built with your photos; it tells us what the walls and earlier patches are likely made of. U.S. Census Bureau, ACS 2020–2024, median year structure built
- 64.3%of Tacoma homes were built before 1980
Asbestos was banned from wall patching compounds in 1977, so old patches and joint compound in these homes are tested before they are sanded. U.S. EPA, regulatory history of asbestos bans
- 1978Washington's lead-safe renovation cutoff
Washington's lead renovation rules cover housing built before 1978, and a firm must be certified to do paid renovation work under them. WAC 365-230-020 and 365-230-360
Define the opening and patch edge
A clean round hole, a jagged cutout and a broken edge next to a seam each get different prep. We note the size, the board thickness and whether there's framing behind to fasten to, then cut back to an edge that will hold tape and compound.
Carry the patch through its finish
The board patch is the small part. Tape, two or three coats, sanding, texture and paint are what make it blend. Tell us whether the quote stops at a patch ready for paint, includes texture, or paints the full wall or ceiling.
Gypsum Association GA-216 application and finishing of gypsum panels
Use broader repair scope when needed
Cracks running along seams, loose board, or several holes close together make a repair job, and we price them as one area. A patch is one opening with a clear edge.
Patches in plaster walls
In older Tacoma houses the hole may be in plaster over lath, which takes a plaster patch. We do historic plaster work in the North End, Stadium and Proctor. Text a photo with a coin or a tape measure beside the hole, and mention any cable or pipe that runs through it.
Drywall Patching questions in Tacoma
Is drywall patching the same as drywall repair?
No. Patching closes one contained hole. Repair covers seams, damaged board or several spots across a wall.
Does a drywall patch include paint?
If you want it to. Paint on just the patch can show, so we'll often suggest painting the wall to the corners.
Request an estimate
For a Tacoma patch, send a photo with a coin or tape measure beside the hole.
(360) 350-8616Share the project details
Choose the work you need and tell us how to reach you.
Text us photos for a quick estimate!